On Sep 30, 2021, at 9:12 AM, Robert Varga <nite@...> wrote:

On 30/09/2021 17:38, Luis Gomez wrote:

I think netconf devs got confused on how our CSIT branches work, I do not see any CSIT job for phosphorous and therefore I do not think we are testing netconf in this release:
https://jenkins.opendaylight.org/releng/view/netconf/ <https://jenkins.opendaylight.org/releng/view/netconf/>

I think netconf devs would be less confused if you could share some writeup of how exactly is test execution wired across integration/test and releng/builder :)

Please note that NETCONF is an MRI project, hence its naming follows its versioning scheme since Silicon GA.

Since we are after autorelease has branched stable/phosphorus, but netconf.git has _not_ branched 2.0.x, netconf's master is still hosting netconf-2.0.x and that in turn is integrated into *both* Phosphorus and Sulfur.

The same is true for odlparent, mdsal, controller, aaa and bgpcep. Yangtools is a bit ahead of the curve and has 7.0.x for Phosphorus and master is hosting yangtools-8.0.0-to-be (and destined for Sulfur).

I hope that paints the current state of git branches enough to understand where we are.

Currently all testing of MRI projects is still wired on the assumption that what we are testing int/dist with that particular MRI project. See bgpcep tests for an example.

That is quite wrong, as MRI projects' CSIT must be able to execute on whatever artifacts are produced, for example, {mriproject}-maven-stage-{branch} job.

Tomas has sunk a significant chunk of his time to correct this and we are still kicking the wheels on that here:

https://jenkins.opendaylight.org/releng/view/netconf/job/netconf-maven-mri-stage-master/ . What that job does is build and stage netconf for release (just link autorelease does for openflowplugin) and then triggers

https://jenkins.opendaylight.org/releng/view/netconf/job/netconf-distribution-mri-test-master/ . This job runs the NETCONF CSIT, but not on int/dist's karaf.tar.gz, but rather on netconf's netconf-karaf.tar.gz.

Which is pretty much what should be happening for all MRI projects, as that way we get fully-vetted artifacts before we decide to run our {project}-release-merge job to publish them to Nexus (step done manually by Anil for autorelease).

Based on all of this, please start saying goodbye to the idea that MRI projects have CSIT job names bearing SimRel names -- currently that would mean executing netconf/master CSIT twice (sulfur and phosphorus).

Also, please be patient while we bring all of this long-overlooked task to fruition.

As for netconf-csit-1node-scale-max-devices-only job, specifically, that one underwent a rewrite and is still pending stabilization. The test never really worked as it should have.

As for overall Phosphorus GA release, I just do not see the point holding it up anymore. Once it is out, we will be finally able to wipe Aluminium, reducing cognitive load significantly due to the genius Netvirt no longer being in the picture.

If there is anything wrong in GA, we have SR1 scheduled exactly 4 weeks from today.

Regards,
Robert

BR/Luis

On Sep 30, 2021, at 8:19 AM, Daniel de la Rosa <ddelarosa0707@... <mailto:ddelarosa0707@...>> wrote:



On Thu, Sep 30, 2021 at 4:26 AM Robert Varga <nite@... <mailto:nite@...>> wrote:

On 29/09/2021 20:29, Daniel de la Rosa wrote:
>
>
> On Wed, Sep 29, 2021 at 9:52 AM Robert Varga <nite@...
<mailto:nite@...>
> <mailto:nite@... <mailto:nite@...>>> wrote:
>
> On 27/09/2021 21:18, Daniel de la Rosa wrote:
> > It seems that we are still having Bgp and pcep issues but are
> they all
> > critical ? Or can we fix them later so we can release
phosphorus ?
> >
> > On Thu, Sep 23, 2021 at 5:08 AM Robert Varga <nite@...
<mailto:nite@...>
> <mailto:nite@... <mailto:nite@...>>
> > <mailto:nite@... <mailto:nite@...> <mailto:nite@...
<mailto:nite@...>>>> wrote:
> >
> > On 23/09/2021 05:54, Daniel de la Rosa wrote:
> > >
> > > Phosphorus AR#212 integration #169 has only one
test case
> failed
> > >
> > > bgpcep
> >
>
https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/>
> <https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/>>
> >
> <https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/>
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/>>>
> >
> <https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/>
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/>>
> >
> <https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/>
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/
<https://jenkins.opendaylight.org/releng/job/bgpcep-csit-1node-userfeatures-all-phosphorus/167/>>>>
> > >
> > > so looks to me like a good RC candidate
> >
> > It seems we have a few regressions in both BGP and
PCEP. I
> suspect I
> > know the culprit behind at least one of the failures,
should
> have an
> > updated bgpcep ready later today.
>
> Okay, so we have one remaining issue in BGPCEP, but after
spending
> today
> trying to make sense of what is going on, it is not a
regression, just
> shifted timing in code.
>
> It may have been detected transiently before, but now it is
getting
> caught in every built.
>
> The underlying problem has been there since late 2017, maybe
even as a
> day-0 issue.
>
> From BGPCEP perspective we are good to release
>
https://jenkins.opendaylight.org/releng/job/autorelease-release-phosphorus-mvn35-openjdk11/221/
<https://jenkins.opendaylight.org/releng/job/autorelease-release-phosphorus-mvn35-openjdk11/221/>
> <https://jenkins.opendaylight.org/releng/job/autorelease-release-phosphorus-mvn35-openjdk11/221/
<https://jenkins.opendaylight.org/releng/job/autorelease-release-phosphorus-mvn35-openjdk11/221/>>
>
>
> Thanks Robert.. I've come up with this phosphorus release
approval for TSC
>
>
https://wiki.opendaylight.org/display/ODL/Phosphorus+Formal+Release+Approval
<https://wiki.opendaylight.org/display/ODL/Phosphorus+Formal+Release+Approval>

>
<https://wiki.opendaylight.org/display/ODL/Phosphorus+Formal+Release+Approval
<https://wiki.opendaylight.org/display/ODL/Phosphorus+Formal+Release+Approval>>
>
> but I couldn't find the right mri test ... it is not 39 right?
>
>
https://jenkins.opendaylight.org/releng/view/autorelease/job/integration-distribution-mri-test-phosphorus/39/
<https://jenkins.opendaylight.org/releng/view/autorelease/job/integration-distribution-mri-test-phosphorus/39/>

>
<https://jenkins.opendaylight.org/releng/view/autorelease/job/integration-distribution-mri-test-phosphorus/39/
<https://jenkins.opendaylight.org/releng/view/autorelease/job/integration-distribution-mri-test-phosphorus/39/>>

So the mri-test-phosphorus does not kick off of autorelease, but runs
periodically. I have kicked off #40, but #39 should be accurate.


both #40 and #39 is having this issue

ERROR: Build aborted. Can't trigger undefined projects. 1 of the below project(s) can't be resolved:
> netconf-csit-1node-scale-max-devices-only-master




Regards,
Robert