[release] [OpenDaylight TSC] 2023.03 Argon MRI bump


Daniel de la Rosa
 

Hello Robert and all

When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN said that they are ready so we can try to release it on time by March 16th?

Thanks

On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@...> wrote:
On 24/01/2023 19.22, Robert Varga wrote:
> Hello everyone,
>
> after a few months of work, getting stuck in various places, the 2023.03
> Argon MRI bump is ready here:
> https://git.opendaylight.org/gerrit/q/topic:argon-mri
>
> Upgrade guide is here
> https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html and assumes Chlorine SR2 as the baseline.
>
> I am rolling these changes in now, so we get a reading of CSIT before
> Code Freeze date.
>
> I expect to drop another MRI update to upgrade Karaf and deliver a few
> other improvements/fixes that are under review. Also CSIT will probably
> shake out some things...

So the first-order merge has been done. I am now working on the
secondary update, currently being at controller.

So far things are looking okay, except the mockito-5 upgrade is flushing
out a few issues. I think I have them mostly sorted, so I expect to have
things lined up tomorrow.

Regards,
Robert






Robert Varga
 

On 03/03/2023 07.13, Daniel de la Rosa wrote:
Hello Robert and all
When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN <mailto:guillaume.lambert@...> said that they are ready so we can try to release it on time by March 16th?
Hello Daniel,

so my stuff just went in, not sure where tpce is. I think we need to cut branches before considering release, right?

Regards,
Robert

Thanks
On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@... <mailto:nite@...>> wrote:
On 24/01/2023 19.22, Robert Varga wrote:
> Hello everyone,
>
> after a few months of work, getting stuck in various places, the
2023.03
> Argon MRI bump is ready here:
> https://git.opendaylight.org/gerrit/q/topic:argon-mri
<https://git.opendaylight.org/gerrit/q/topic:argon-mri>
>
> Upgrade guide is here
>
https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html <https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html> and assumes Chlorine SR2 as the baseline.
>
> I am rolling these changes in now, so we get a reading of CSIT
before
> Code Freeze date.
>
> I expect to drop another MRI update to upgrade Karaf and deliver
a few
> other improvements/fixes that are under review. Also CSIT will
probably
> shake out some things...
So the first-order merge has been done. I am now working on the
secondary update, currently being at controller.
So far things are looking okay, except the mockito-5 upgrade is
flushing
out a few issues. I think I have them mostly sorted, so I expect to
have
things lined up tomorrow.
Regards,
Robert


Gilles Thouenon
 

Hello Daniel, Robert,

On TPCE side, I'm not totally ready.
1) I added new yang models in transportpce-models that has entailed a build featue issue on transportpce side => I guess I solved it splitting one feature into two in transportpce-models project.
2) After that, I need to merge several changes currently still under review on transportpce
3) Then, pull out stable/argon branches for both transportpce-models and transportpce projects
4) then, release transportpce-models, and transportpce
5) finally, update change https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761 on distribution with released versions of transportpce projects

I think I still need few days...

Best Regards,
Gilles


Orange Restricted

-----Message d'origine-----
De : release@... <release@...> De la part de Robert Varga
Envoyé : vendredi 3 mars 2023 16:54
À : Daniel de la Rosa <ddelarosa0707@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Cc : release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

On 03/03/2023 07.13, Daniel de la Rosa wrote:
Hello Robert and all

When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN
<mailto:guillaume.lambert@...> said that they are ready so we
can try to release it on time by March 16th?
Hello Daniel,

so my stuff just went in, not sure where tpce is. I think we need to cut branches before considering release, right?

Regards,
Robert


Thanks

On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@...
<mailto:nite@...>> wrote:

On 24/01/2023 19.22, Robert Varga wrote:
> Hello everyone,
>
> after a few months of work, getting stuck in various places, the
2023.03
> Argon MRI bump is ready here:
> https://git.opendaylight.org/gerrit/q/topic:argon-mri
<https://git.opendaylight.org/gerrit/q/topic:argon-mri>
>
> Upgrade guide is here
>
https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html <https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html> and assumes Chlorine SR2 as the baseline.
>
> I am rolling these changes in now, so we get a reading of CSIT
before
> Code Freeze date.
>
> I expect to drop another MRI update to upgrade Karaf and deliver
a few
> other improvements/fixes that are under review. Also CSIT will
probably
> shake out some things...

So the first-order merge has been done. I am now working on the
secondary update, currently being at controller.

So far things are looking okay, except the mockito-5 upgrade is
flushing
out a few issues. I think I have them mostly sorted, so I expect to
have
things lined up tomorrow.

Regards,
Robert









_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.


Robert Varga
 

So let's wait a bit and see if the tests pass etc...





-------- Original message --------
From: gilles.thouenon@...
Date: 3/3/23 17:27 (GMT+01:00)
To: Robert Varga <nite@...>, Daniel de la Rosa <ddelarosa0707@...>, LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Cc: release@..., tsc@...
Subject: RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

Hello Daniel, Robert,

On TPCE side, I'm  not totally ready.
1) I added new yang models in transportpce-models that has entailed a build featue issue on transportpce side => I guess I solved it splitting one feature into two in transportpce-models project.
2) After that, I need to merge several changes currently still under review on transportpce
3) Then, pull out stable/argon branches for both transportpce-models and transportpce projects
4) then, release transportpce-models, and transportpce
5) finally, update change  https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761 on distribution with released versions of transportpce projects

I think I still need few days...

Best Regards,
Gilles


Orange Restricted

-----Message d'origine-----
De : release@... <release@...> De la part de Robert Varga
Envoyé : vendredi 3 mars 2023 16:54
À : Daniel de la Rosa <ddelarosa0707@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Cc : release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

On 03/03/2023 07.13, Daniel de la Rosa wrote:
> Hello Robert and all
>
> When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN
> <mailto:guillaume.lambert@...> said that they are ready so we
> can try to release it on time by March 16th?

Hello Daniel,

so my stuff just went in, not sure where tpce is. I think we need to cut branches before considering release, right?

Regards,
Robert

>
> Thanks
>
> On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@...
> <mailto:nite@...>> wrote:
>
>     On 24/01/2023 19.22, Robert Varga wrote:
>      > Hello everyone,
>      >
>      > after a few months of work, getting stuck in various places, the
>     2023.03
>      > Argon MRI bump is ready here:
>      > https://git.opendaylight.org/gerrit/q/topic:argon-mri
>     <https://git.opendaylight.org/gerrit/q/topic:argon-mri>
>      >
>      > Upgrade guide is here
>      >
>     https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html <https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html> and assumes Chlorine SR2 as the baseline.
>      >
>      > I am rolling these changes in now, so we get a reading of CSIT
>     before
>      > Code Freeze date.
>      >
>      > I expect to drop another MRI update to upgrade Karaf and deliver
>     a few
>      > other improvements/fixes that are under review. Also CSIT will
>     probably
>      > shake out some things...
>
>     So the first-order merge has been done. I am now working on the
>     secondary update, currently being at controller.
>
>     So far things are looking okay, except the mockito-5 upgrade is
>     flushing
>     out a few issues. I think I have them mostly sorted, so I expect to
>     have
>     things lined up tomorrow.
>
>     Regards,
>     Robert
>
>
>
>
>
>





_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.


Daniel de la Rosa
 

Hello Gilles and all, any updates?

Thanks

On Fri, Mar 3, 2023 at 10:37 AM Robert Varga <nite@...> wrote:
So let's wait a bit and see if the tests pass etc...





-------- Original message --------
Date: 3/3/23 17:27 (GMT+01:00)
To: Robert Varga <nite@...>, Daniel de la Rosa <ddelarosa0707@...>, LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Subject: RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

Hello Daniel, Robert,

On TPCE side, I'm  not totally ready.
1) I added new yang models in transportpce-models that has entailed a build featue issue on transportpce side => I guess I solved it splitting one feature into two in transportpce-models project.
2) After that, I need to merge several changes currently still under review on transportpce
3) Then, pull out stable/argon branches for both transportpce-models and transportpce projects
4) then, release transportpce-models, and transportpce
5) finally, update change  https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761 on distribution with released versions of transportpce projects

I think I still need few days...

Best Regards,
Gilles


Orange Restricted

-----Message d'origine-----
De : release@... <release@...> De la part de Robert Varga
Envoyé : vendredi 3 mars 2023 16:54
À : Daniel de la Rosa <ddelarosa0707@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Cc : release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

On 03/03/2023 07.13, Daniel de la Rosa wrote:
> Hello Robert and all
>
> When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN
> <mailto:guillaume.lambert@...> said that they are ready so we
> can try to release it on time by March 16th?

Hello Daniel,

so my stuff just went in, not sure where tpce is. I think we need to cut branches before considering release, right?

Regards,
Robert

>
> Thanks
>
> On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@...
> <mailto:nite@...>> wrote:
>
>     On 24/01/2023 19.22, Robert Varga wrote:
>      > Hello everyone,
>      >
>      > after a few months of work, getting stuck in various places, the
>     2023.03
>      > Argon MRI bump is ready here:
>      > https://git.opendaylight.org/gerrit/q/topic:argon-mri
>     <https://git.opendaylight.org/gerrit/q/topic:argon-mri>
>      >
>      > Upgrade guide is here
>      >
>     https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html <https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html> and assumes Chlorine SR2 as the baseline.
>      >
>      > I am rolling these changes in now, so we get a reading of CSIT
>     before
>      > Code Freeze date.
>      >
>      > I expect to drop another MRI update to upgrade Karaf and deliver
>     a few
>      > other improvements/fixes that are under review. Also CSIT will
>     probably
>      > shake out some things...
>
>     So the first-order merge has been done. I am now working on the
>     secondary update, currently being at controller.
>
>     So far things are looking okay, except the mockito-5 upgrade is
>     flushing
>     out a few issues. I think I have them mostly sorted, so I expect to
>     have
>     things lined up tomorrow.
>
>     Regards,
>     Robert
>
>
>
>
>
>





_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.


Gilles Thouenon
 

Hello Daniel,

Yes, sure, things are progressing.

Artifacts for Transportpce-models are released in 18.0.0. I am waiting for the last change of transportpce to be merged (tests are running) before pulling the stable/argon branch and release it.

So, if everything goes well, in a few hours argon release will be over for transportpce project.

Gilles

 

De : Daniel de la Rosa <ddelarosa0707@...>
Envoyé : mardi 7 mars 2023 23:31
À : Robert Varga <nite@...>
Cc : THOUENON Gilles INNOV/NET <gilles.thouenon@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Gilles and all, any updates?

 

Thanks

 

On Fri, Mar 3, 2023 at 10:37 AM Robert Varga <nite@...> wrote:

So let's wait a bit and see if the tests pass etc...

 

 

 

 

 

-------- Original message --------

Date: 3/3/23 17:27 (GMT+01:00)

To: Robert Varga <nite@...>, Daniel de la Rosa <ddelarosa0707@...>, LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>

Subject: RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Daniel, Robert,

On TPCE side, I'm  not totally ready.
1) I added new yang models in transportpce-models that has entailed a build featue issue on transportpce side => I guess I solved it splitting one feature into two in transportpce-models project.
2) After that, I need to merge several changes currently still under review on transportpce
3) Then, pull out stable/argon branches for both transportpce-models and transportpce projects
4) then, release transportpce-models, and transportpce
5) finally, update change  https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761 on distribution with released versions of transportpce projects

I think I still need few days...

Best Regards,
Gilles


Orange Restricted

-----Message d'origine-----
De : release@... <release@...> De la part de Robert Varga
Envoyé : vendredi 3 mars 2023 16:54
À : Daniel de la Rosa <ddelarosa0707@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Cc : release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

On 03/03/2023 07.13, Daniel de la Rosa wrote:
> Hello Robert and all
>
> When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN
> <mailto:guillaume.lambert@...> said that they are ready so we
> can try to release it on time by March 16th?

Hello Daniel,

so my stuff just went in, not sure where tpce is. I think we need to cut branches before considering release, right?

Regards,
Robert

>
> Thanks
>
> On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@...
> <mailto:nite@...>> wrote:
>
>     On 24/01/2023 19.22, Robert Varga wrote:
>      > Hello everyone,
>      >
>      > after a few months of work, getting stuck in various places, the
>     2023.03
>      > Argon MRI bump is ready here:
>      > https://git.opendaylight.org/gerrit/q/topic:argon-mri
>     <https://git.opendaylight.org/gerrit/q/topic:argon-mri>
>      >
>      > Upgrade guide is here
>      >
>     https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html <https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html> and assumes Chlorine SR2 as the baseline.
>      >
>      > I am rolling these changes in now, so we get a reading of CSIT
>     before
>      > Code Freeze date.
>      >
>      > I expect to drop another MRI update to upgrade Karaf and deliver
>     a few
>      > other improvements/fixes that are under review. Also CSIT will
>     probably
>      > shake out some things...
>
>     So the first-order merge has been done. I am now working on the
>     secondary update, currently being at controller.
>
>     So far things are looking okay, except the mockito-5 upgrade is
>     flushing
>     out a few issues. I think I have them mostly sorted, so I expect to
>     have
>     things lined up tomorrow.
>
>     Regards,
>     Robert
>
>
>
>
>
>





_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

 

Orange Restricted

_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.


Gilles Thouenon
 

Hello Daniel,

 

I believe that on TransportPCE side everything is over for the release of Argon.

I released the transportpce-models artifacts in 18.0.0, the transportpce artifacts in 7.0.0 and prepared the integration/distribution change 104761 to integrate transportpce into the distribution (https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761). The latter has passed the gate since this morning and is currently being reviewed.

It will remain us the release note to prepare.

Please let me know if anything else is expected from us.

 

Best Regards,

 

Gilles

 

 

Orange Restricted

De : THOUENON Gilles INNOV/NET
Envoyé : mercredi 8 mars 2023 16:22
À : 'Daniel de la Rosa' <ddelarosa0707@...>; Robert Varga <nite@...>
Cc : LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Daniel,

Yes, sure, things are progressing.

Artifacts for Transportpce-models are released in 18.0.0. I am waiting for the last change of transportpce to be merged (tests are running) before pulling the stable/argon branch and release it.

So, if everything goes well, in a few hours argon release will be over for transportpce project.

Gilles

 

De : Daniel de la Rosa <ddelarosa0707@...>
Envoyé : mardi 7 mars 2023 23:31
À : Robert Varga <nite@...>
Cc : THOUENON Gilles INNOV/NET <gilles.thouenon@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Gilles and all, any updates?

 

Thanks

 

On Fri, Mar 3, 2023 at 10:37 AM Robert Varga <nite@...> wrote:

So let's wait a bit and see if the tests pass etc...

 

 

 

 

 

-------- Original message --------

Date: 3/3/23 17:27 (GMT+01:00)

To: Robert Varga <nite@...>, Daniel de la Rosa <ddelarosa0707@...>, LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>

Subject: RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Daniel, Robert,

On TPCE side, I'm  not totally ready.
1) I added new yang models in transportpce-models that has entailed a build featue issue on transportpce side => I guess I solved it splitting one feature into two in transportpce-models project.
2) After that, I need to merge several changes currently still under review on transportpce
3) Then, pull out stable/argon branches for both transportpce-models and transportpce projects
4) then, release transportpce-models, and transportpce
5) finally, update change  https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761 on distribution with released versions of transportpce projects

I think I still need few days...

Best Regards,
Gilles


Orange Restricted

-----Message d'origine-----
De : release@... <release@...> De la part de Robert Varga
Envoyé : vendredi 3 mars 2023 16:54
À : Daniel de la Rosa <ddelarosa0707@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Cc : release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

On 03/03/2023 07.13, Daniel de la Rosa wrote:
> Hello Robert and all
>
> When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN
> <mailto:guillaume.lambert@...> said that they are ready so we
> can try to release it on time by March 16th?

Hello Daniel,

so my stuff just went in, not sure where tpce is. I think we need to cut branches before considering release, right?

Regards,
Robert

>
> Thanks
>
> On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@...
> <mailto:nite@...>> wrote:
>
>     On 24/01/2023 19.22, Robert Varga wrote:
>      > Hello everyone,
>      >
>      > after a few months of work, getting stuck in various places, the
>     2023.03
>      > Argon MRI bump is ready here:
>      > https://git.opendaylight.org/gerrit/q/topic:argon-mri
>     <https://git.opendaylight.org/gerrit/q/topic:argon-mri>
>      >
>      > Upgrade guide is here
>      >
>     https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html <https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html> and assumes Chlorine SR2 as the baseline.
>      >
>      > I am rolling these changes in now, so we get a reading of CSIT
>     before
>      > Code Freeze date.
>      >
>      > I expect to drop another MRI update to upgrade Karaf and deliver
>     a few
>      > other improvements/fixes that are under review. Also CSIT will
>     probably
>      > shake out some things...
>
>     So the first-order merge has been done. I am now working on the
>     secondary update, currently being at controller.
>
>     So far things are looking okay, except the mockito-5 upgrade is
>     flushing
>     out a few issues. I think I have them mostly sorted, so I expect to
>     have
>     things lined up tomorrow.
>
>     Regards,
>     Robert
>
>
>
>
>
>





_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

 

Orange Restricted

_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.


Daniel de la Rosa
 

Hello Gilles and all 


Thanks


Thanks

On Fri, Mar 10, 2023 at 4:50 AM <gilles.thouenon@...> wrote:

Hello Daniel,

 

I believe that on TransportPCE side everything is over for the release of Argon.

I released the transportpce-models artifacts in 18.0.0, the transportpce artifacts in 7.0.0 and prepared the integration/distribution change 104761 to integrate transportpce into the distribution (https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761). The latter has passed the gate since this morning and is currently being reviewed.

It will remain us the release note to prepare.

Please let me know if anything else is expected from us.

 

Best Regards,

 

Gilles

 

 

Orange Restricted

De : THOUENON Gilles INNOV/NET
Envoyé : mercredi 8 mars 2023 16:22
À : 'Daniel de la Rosa' <ddelarosa0707@...>; Robert Varga <nite@...>
Cc : LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Daniel,

Yes, sure, things are progressing.

Artifacts for Transportpce-models are released in 18.0.0. I am waiting for the last change of transportpce to be merged (tests are running) before pulling the stable/argon branch and release it.

So, if everything goes well, in a few hours argon release will be over for transportpce project.

Gilles

 

De : Daniel de la Rosa <ddelarosa0707@...>
Envoyé : mardi 7 mars 2023 23:31
À : Robert Varga <nite@...>
Cc : THOUENON Gilles INNOV/NET <gilles.thouenon@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Gilles and all, any updates?

 

Thanks

 

On Fri, Mar 3, 2023 at 10:37 AM Robert Varga <nite@...> wrote:

So let's wait a bit and see if the tests pass etc...

 

 

 

 

 

-------- Original message --------

Date: 3/3/23 17:27 (GMT+01:00)

To: Robert Varga <nite@...>, Daniel de la Rosa <ddelarosa0707@...>, LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>

Subject: RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Daniel, Robert,

On TPCE side, I'm  not totally ready.
1) I added new yang models in transportpce-models that has entailed a build featue issue on transportpce side => I guess I solved it splitting one feature into two in transportpce-models project.
2) After that, I need to merge several changes currently still under review on transportpce
3) Then, pull out stable/argon branches for both transportpce-models and transportpce projects
4) then, release transportpce-models, and transportpce
5) finally, update change  https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761 on distribution with released versions of transportpce projects

I think I still need few days...

Best Regards,
Gilles


Orange Restricted

-----Message d'origine-----
De : release@... <release@...> De la part de Robert Varga
Envoyé : vendredi 3 mars 2023 16:54
À : Daniel de la Rosa <ddelarosa0707@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Cc : release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

On 03/03/2023 07.13, Daniel de la Rosa wrote:
> Hello Robert and all
>
> When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN
> <mailto:guillaume.lambert@...> said that they are ready so we
> can try to release it on time by March 16th?

Hello Daniel,

so my stuff just went in, not sure where tpce is. I think we need to cut branches before considering release, right?

Regards,
Robert

>
> Thanks
>
> On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@...
> <mailto:nite@...>> wrote:
>
>     On 24/01/2023 19.22, Robert Varga wrote:
>      > Hello everyone,
>      >
>      > after a few months of work, getting stuck in various places, the
>     2023.03
>      > Argon MRI bump is ready here:
>      > https://git.opendaylight.org/gerrit/q/topic:argon-mri
>     <https://git.opendaylight.org/gerrit/q/topic:argon-mri>
>      >
>      > Upgrade guide is here
>      >
>     https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html <https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html> and assumes Chlorine SR2 as the baseline.
>      >
>      > I am rolling these changes in now, so we get a reading of CSIT
>     before
>      > Code Freeze date.
>      >
>      > I expect to drop another MRI update to upgrade Karaf and deliver
>     a few
>      > other improvements/fixes that are under review. Also CSIT will
>     probably
>      > shake out some things...
>
>     So the first-order merge has been done. I am now working on the
>     secondary update, currently being at controller.
>
>     So far things are looking okay, except the mockito-5 upgrade is
>     flushing
>     out a few issues. I think I have them mostly sorted, so I expect to
>     have
>     things lined up tomorrow.
>
>     Regards,
>     Robert
>
>
>
>
>
>





_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

 

Orange Restricted

_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.


Gilles Thouenon
 

Hello Daniel,

 

As I said last Friday, I released transportpce artifacts and prepared the change for integration/distribution.

That latter passed the gate, so, everything looks fine since Friday.

I let a committer of Integration/distribution merge it or tell me if something else is expected from my side.

 

Best Regards,

 

Gilles

 

De : Daniel de la Rosa <ddelarosa0707@...>
Envoyé : mardi 14 mars 2023 16:00
À : THOUENON Gilles INNOV/NET <gilles.thouenon@...>
Cc : Robert Varga <nite@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Gilles and all 

 

 

Thanks

 

 

Thanks

 

On Fri, Mar 10, 2023 at 4:50 AM <gilles.thouenon@...> wrote:

Hello Daniel,

 

I believe that on TransportPCE side everything is over for the release of Argon.

I released the transportpce-models artifacts in 18.0.0, the transportpce artifacts in 7.0.0 and prepared the integration/distribution change 104761 to integrate transportpce into the distribution (https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761). The latter has passed the gate since this morning and is currently being reviewed.

It will remain us the release note to prepare.

Please let me know if anything else is expected from us.

 

Best Regards,

 

Gilles

 

 

Orange Restricted

 

Orange Restricted

De : THOUENON Gilles INNOV/NET
Envoyé : mercredi 8 mars 2023 16:22
À : 'Daniel de la Rosa' <ddelarosa0707@...>; Robert Varga <nite@...>
Cc : LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Daniel,

Yes, sure, things are progressing.

Artifacts for Transportpce-models are released in 18.0.0. I am waiting for the last change of transportpce to be merged (tests are running) before pulling the stable/argon branch and release it.

So, if everything goes well, in a few hours argon release will be over for transportpce project.

Gilles

 

De : Daniel de la Rosa <ddelarosa0707@...>
Envoyé : mardi 7 mars 2023 23:31
À : Robert Varga <nite@...>
Cc : THOUENON Gilles INNOV/NET <gilles.thouenon@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Gilles and all, any updates?

 

Thanks

 

On Fri, Mar 3, 2023 at 10:37 AM Robert Varga <nite@...> wrote:

So let's wait a bit and see if the tests pass etc...

 

 

 

 

 

-------- Original message --------

Date: 3/3/23 17:27 (GMT+01:00)

To: Robert Varga <nite@...>, Daniel de la Rosa <ddelarosa0707@...>, LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>

Subject: RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

 

Hello Daniel, Robert,

On TPCE side, I'm  not totally ready.
1) I added new yang models in transportpce-models that has entailed a build featue issue on transportpce side => I guess I solved it splitting one feature into two in transportpce-models project.
2) After that, I need to merge several changes currently still under review on transportpce
3) Then, pull out stable/argon branches for both transportpce-models and transportpce projects
4) then, release transportpce-models, and transportpce
5) finally, update change  https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761 on distribution with released versions of transportpce projects

I think I still need few days...

Best Regards,
Gilles


Orange Restricted

-----Message d'origine-----
De : release@... <release@...> De la part de Robert Varga
Envoyé : vendredi 3 mars 2023 16:54
À : Daniel de la Rosa <ddelarosa0707@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Cc : release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

On 03/03/2023 07.13, Daniel de la Rosa wrote:
> Hello Robert and all
>
> When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN
> <mailto:guillaume.lambert@...> said that they are ready so we
> can try to release it on time by March 16th?

Hello Daniel,

so my stuff just went in, not sure where tpce is. I think we need to cut branches before considering release, right?

Regards,
Robert

>
> Thanks
>
> On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@...
> <mailto:nite@...>> wrote:
>
>     On 24/01/2023 19.22, Robert Varga wrote:
>      > Hello everyone,
>      >
>      > after a few months of work, getting stuck in various places, the
>     2023.03
>      > Argon MRI bump is ready here:
>      > https://git.opendaylight.org/gerrit/q/topic:argon-mri
>     <https://git.opendaylight.org/gerrit/q/topic:argon-mri>
>      >
>      > Upgrade guide is here
>      >
>     https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html <https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html> and assumes Chlorine SR2 as the baseline.
>      >
>      > I am rolling these changes in now, so we get a reading of CSIT
>     before
>      > Code Freeze date.
>      >
>      > I expect to drop another MRI update to upgrade Karaf and deliver
>     a few
>      > other improvements/fixes that are under review. Also CSIT will
>     probably
>      > shake out some things...
>
>     So the first-order merge has been done. I am now working on the
>     secondary update, currently being at controller.
>
>     So far things are looking okay, except the mockito-5 upgrade is
>     flushing
>     out a few issues. I think I have them mostly sorted, so I expect to
>     have
>     things lined up tomorrow.
>
>     Regards,
>     Robert
>
>
>
>
>
>





_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

 

Orange Restricted

_________________________________________________________________________________________________________________________
 
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.
 
This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.
_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.


Luis Gomez
 

FYI, I just merged the patch. There was a similar patch for Chlorine so I thought we got all in at that time.


On Mar 14, 2023, at 8:22 AM, Gilles Thouenon via lists.opendaylight.org <gilles.thouenon=orange.com@...> wrote:

Hello Daniel,
 
As I said last Friday, I released transportpce artifacts and prepared the change for integration/distribution.
That latter passed the gate, so, everything looks fine since Friday.
I let a committer of Integration/distribution merge it or tell me if something else is expected from my side.
 
Best Regards,
 
Gilles
 
De : Daniel de la Rosa <ddelarosa0707@...> 
Envoyé : mardi 14 mars 2023 16:00
À : THOUENON Gilles INNOV/NET <gilles.thouenon@...>
Cc : Robert Varga <nite@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump
 
Hello Gilles and all 
 
 
Thanks
 
 
Thanks
 
On Fri, Mar 10, 2023 at 4:50 AM <gilles.thouenon@...> wrote:
Hello Daniel,
 
I believe that on TransportPCE side everything is over for the release of Argon.
I released the transportpce-models artifacts in 18.0.0, the transportpce artifacts in 7.0.0 and prepared the integration/distribution change 104761 to integrate transportpce into the distribution (https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761). The latter has passed the gate since this morning and is currently being reviewed.
It will remain us the release note to prepare.
Please let me know if anything else is expected from us.
 
Best Regards,
 
Gilles
 
 
Orange Restricted
 
Orange Restricted
De : THOUENON Gilles INNOV/NET 
Envoyé : mercredi 8 mars 2023 16:22
À : 'Daniel de la Rosa' <ddelarosa0707@...>; Robert Varga <nite@...>
Cc : LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>; release@...; tsc@...
Objet : RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump
 
Hello Daniel,
Yes, sure, things are progressing.
Artifacts for Transportpce-models are released in 18.0.0. I am waiting for the last change of transportpce to be merged (tests are running) before pulling the stable/argon branch and release it.
So, if everything goes well, in a few hours argon release will be over for transportpce project.
Gilles
 
De : Daniel de la Rosa <ddelarosa0707@...> 
Envoyé : mardi 7 mars 2023 23:31
À : Robert Varga <nite@...>
Cc : THOUENON Gilles INNOV/NET <gilles.thouenon@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>;release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump
 
Hello Gilles and all, any updates?
 
Thanks
 
On Fri, Mar 3, 2023 at 10:37 AM Robert Varga <nite@...> wrote:
So let's wait a bit and see if the tests pass etc...
 
 
 
 
 
-------- Original message --------
Date: 3/3/23 17:27 (GMT+01:00)
To: Robert Varga <nite@...>, Daniel de la Rosa <ddelarosa0707@...>, LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Subject: RE: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump
 

Hello Daniel, Robert,

On TPCE side, I'm  not totally ready.
1) I added new yang models in transportpce-models that has entailed a build featue issue on transportpce side => I guess I solved it splitting one feature into two in transportpce-models project.
2) After that, I need to merge several changes currently still under review on transportpce
3) Then, pull out stable/argon branches for both transportpce-models and transportpce projects
4) then, release transportpce-models, and transportpce
5) finally, update change  https://git.opendaylight.org/gerrit/c/integration/distribution/+/104761 on distribution with released versions of transportpce projects

I think I still need few days...

Best Regards,
Gilles


Orange Restricted

-----Message d'origine-----
De : release@... <release@...> De la part de Robert Varga
Envoyé : vendredi 3 mars 2023 16:54
À : Daniel de la Rosa <ddelarosa0707@...>; LAMBERT Guillaume INNOV/NET <guillaume.lambert@...>
Cc : release@...; tsc@...
Objet : Re: [release] [OpenDaylight TSC] 2023.03 Argon MRI bump

On 03/03/2023 07.13, Daniel de la Rosa wrote:
> Hello Robert and all
> 
> When are we going to pick a RC for Argon? @LAMBERT Guillaume TGI/OLN 
> <mailto:guillaume.lambert@...> said that they are ready so we 
> can try to release it on time by March 16th?

Hello Daniel,

so my stuff just went in, not sure where tpce is. I think we need to cut branches before considering release, right?

Regards,
Robert

> 
> Thanks
> 
> On Thu, Feb 23, 2023 at 9:00 AM Robert Varga <nite@... 
> <mailto:nite@...>> wrote:
> 
>     On 24/01/2023 19.22, Robert Varga wrote:
>      > Hello everyone,
>      >
>      > after a few months of work, getting stuck in various places, the
>     2023.03
>      > Argon MRI bump is ready here:
>      > https://git.opendaylight.org/gerrit/q/topic:argon-mri
>     <https://git.opendaylight.org/gerrit/q/topic:argon-mri>
>      >
>      > Upgrade guide is here
>      >
>     https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html <https://docs.opendaylight.org/en/latest/release-notes/upgrade-process.html> and assumes Chlorine SR2 as the baseline.
>      >
>      > I am rolling these changes in now, so we get a reading of CSIT
>     before
>      > Code Freeze date.
>      >
>      > I expect to drop another MRI update to upgrade Karaf and deliver
>     a few
>      > other improvements/fixes that are under review. Also CSIT will
>     probably
>      > shake out some things...
> 
>     So the first-order merge has been done. I am now working on the
>     secondary update, currently being at controller.
> 
>     So far things are looking okay, except the mockito-5 upgrade is
>     flushing
>     out a few issues. I think I have them mostly sorted, so I expect to
>     have
>     things lined up tomorrow.
> 
>     Regards,
>     Robert
> 
> 
> 
> 
> 
> 





_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

 
Orange Restricted
_________________________________________________________________________________________________________________________
 
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.
 
This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.
_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.