Re: [vtn-dev] Question about how to setup vtn-coodinator + multi-controller.


Hideyuki Tai <h-tai@...>
 

Hi Denghui,

 

Ok, we will update the page.

 

We’ll let you know when it is updated.

 

Regards,

Hideyuki Tai

 

From: huang denghui [mailto:huangdenghui@...]
Sent: Thursday, January 09, 2014 11:14 AM
To: Tai, Hideyuki
Cc: Venkatrangan G - ERS, HCL Tech; integration-dev@...; vtn-dev@...
Subject: ##freemail## Re: [vtn-dev] [integration-dev] Question about how to setup vtn-coodinator + multi-controller.

 

Hi Hideyuki Tai

 

    Thanks, then, please update that wiki page, in avoid to get more people confused.

 

 

--denghui

 

2014/1/9 Hideyuki Tai <h-tai@...>

Hi Denghui,

 

Your understanding is perfectly right.

 

The picture in the following page does not match the boundary configuration shown in the page.

Regards,

Hideyuki Tai

 

From: vtn-dev-bounces@... [mailto:vtn-dev-bounces@...] On Behalf Of huang denghui
Sent: Thursday, January 09, 2014 12:31 AM
To: Venkatrangan G - ERS, HCL Tech
Cc: integration-dev@...; vtn-dev@...
Subject: Re: [vtn-dev] [integration-dev] Question about how to setup vtn-coodinator + multi-controller.

 

Hi Venkat

   This is definitely what i need. Thanks.

One more question

Create boundary and vLink:

curl -v -X POST -H 'content-type: application/json' -H 'username: admin' -H 'password: adminpass' -H 'ipaddr:127.0.0.1' -d '{"boundary": {"boundary_id": "b5", "link": {"controller1_id": "controller1", "domain1_id": "(DEFAULT)", "logical_port1_id": "PP-0A:00:00:00:00:00:00:02-s2-eth1", "controller2_id": "controller2", "domain2_id": "(DEFAULT)", "logical_port2_id": "PP-0A:00:00:00:00:00:00:03-s2-eth2"}}}' http://127.0.0.1:8081/vtn-webapi/boundaries.json

From my understanding, boundary is the channel between two controllers, there are two logical ports, and those values are PP-0A:00:00:00:00:00:00:03-s2-eth2 and PP-0A:00:00:00:00:00:00:02-s2-eth1, my questions is against those two logical values, from that picture, we can see the boundary is based on connection between sw6 of controller1 and sw5 of controller2.  so those logical port values confuse me, those should separately represent sw2, sw3.

 

--denghui

 

2014/1/8 Venkatrangan G - ERS, HCL Tech <venkatrangang@...>

Hi Denghui,

 

Please refer to this page in wiki https://wiki.opendaylight.org/view/OpenDaylight_Virtual_Tenant_Network_%28VTN%29:VTNCoordinator:RestApi:Contents, which links you to all the REST API in VTN Coordinator for virtualization.

 

 

Also, Please refer to the

https://wiki.opendaylight.org/view/OpenDaylight_Virtual_Tenant_Network_%28VTN%29:VTN_Coordinator:RestApi:L2_Network_Example_Using_VTN_Virtualization  for the commands in VTN Coordinator for demo scenario.

 

Kindly let us know in case of any queries.

 

Regards,

Venkat G

 

From: integration-dev-bounces@... [mailto:integration-dev-bounces@...] On Behalf Of huang denghui
Sent: Wednesday, January 08, 2014 7:36 PM
To: vtn-dev@...
Cc: integration-dev@...
Subject: [integration-dev] Question about how to setup vtn-coodinator + multi-controller.

 

Hi

   I read this wiki Installation:VTN_Manager, about section Multiple Clusters of Controllers.

also read Demo 3: Layer 2 network across two controllers from NEC_VTN_Demo_0606.pdf

I still have two questions in my mind.

1. I know VTN coordinator talk to controller by VTN manager northbound API, so precondition is coordinator need to know where controller is. Question is how?

2. where i can find a guide on configuring VTN through coordinator?

Thanks.

 

--denghui



::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------

 

 

Join integration-dev@lists.opendaylight.org to automatically receive all group messages.