Re: [controller-dev] Netconf plugin testing


Madhusudhan Kandadai <madhusudhan.opendaylight@...>
 

Hi Reinaldo,

I believe netconf server will be started automatically after starting the controller. Here is the following lines called from config.ini. (Please correct me if I am wrong)
 
# Netconf startup configuration
netconf.tcp.address=127.0.0.1
netconf.tcp.port=8383

netconf.tcp.client.address=127.0.0.1
netconf.tcp.client.port=8383

netconf.ssh.address=0.0.0.0
netconf.ssh.port=1830
netconf.ssh.pk.path = ./configuration/RSA.pk


so, do you think I have to change the ip address, port#, which are defined at 02-libnetconfd.xml according to the one mentioned above? If not, can you please shed some light on this ? Sorry if this is a basic question.

Thanks,
Madhusudhan

On Monday, March 24, 2014 8:20 PM, Reinaldo Penno <rapenno@...> wrote:
Which device are you using as a netconf server? You have to substitute the IP address on the example by the IP address of your  netconf device. You need to make sure netconf is running on the device, etc.




On Mon, Mar 24, 2014 at 7:52 PM, Madhusudhan Kandadai <madhusudhan.opendaylight@...> wrote:
Thanks Reinaldo. I actually took the latest controller from wget https://jenkins.opendaylight.org/integration/job/integration-project-centralized-integration/lastSuccessfulBuild/artifact/distributions/base/target/distributions-base-0.1.2-SNAPSHOT-osgipackage.zip, created a file named "04-libnetconfd.xml" in opendaylight/configuration/initial

Then started the controller using of13 plugin, but I could not see any notification like this:

2014-02-12 04:42:10.043 PST [pool-23-thread-1] INFO  o.o.c.s.c.n.NetconfDevice#libnetconfd - Starting Netconf Client on: /10.0.1.27:830

Am I doing something wrong?

Thanks,
Madhusudhan


On Monday, March 24, 2014 7:37 PM, Reinaldo Penno <rapenno@...> wrote:
If the file is correct, nothing else is needed and a netconf session will be established between ODL and netconf server (device)
 


On Mon, Mar 24, 2014 at 4:45 PM, Madhusudhan Kandadai <madhusudhan.opendaylight@...> wrote:
Hello,

I am interested in performing testing on netconf plugin. I have netconf server and just want to configure ODL. I have gone through the below links on how to test netconf plugin: https://wiki.opendaylight.org/view/OpenDaylight_Controller:Config:Examples:Netconf and https://wiki.opendaylight.org/view/OpenDaylight_Controller:Config:Examples:Netconf:Example_Configuration

If I understand correctly:

1. Should I need to configure yumapro-13.04. If yes, I found the documentation at https://github.com/pikagrue/test-repository-2/tree/master/yumapro-13.04. I am trying hard to install yumapro-13.04 and can you point me the right link for installing the same.
2. Once done with the above step, I *think* I can go to this step https://wiki.opendaylight.org/view/OpenDaylight_Controller:Config:Examples:Netconf#Connecting_to_the_Controller_Configuration_Server and follow the sequence in order.

Does anybody worked on testing netconf plugin, so I need to ask the sequence to get familiar in testing netconf plugin.

Thanks in advance!

Madhusudhan

_______________________________________________
controller-dev mailing list
controller-dev@...
https://lists.opendaylight.org/mailman/listinfo/controller-dev







Join integration-dev@lists.opendaylight.org to automatically receive all group messages.