Hi Moiz, I followed your steps to create single bgp peer but was unable to establish bgp session. Do we need two seperate vm's to create bgp session? Here is the log after executing "exabgp

Andy, I'll get it working with virtualenv and let you know if we can go with that option. -Moiz ________________________________________ Sent: Monday, March 31, 2014 2:34 PM To: Moiz Raja

Upgrading the testlab itself to be python 2.7 isn't going to happen as 2.6 is the system level python on EL6 systems (which the lab runs on). That being said, I _can_ install python 2.7 but anything

Hi Brian and Lakshman, Here are my notes on how to setup controller and exabgp for testing. Please try it out and let me know if you run into any

Hi, During the napa Hackfest we had a discussion about doing some integration testing of the bgp plugin. To enable this testing we need to introduce a bgp speaker. Exabgp seems to fit the bill and a

You might need to pull again due to this patch.

Thanks Reinaldo. I have two scenarios in testing netconf SB plugin: (a) Have LINC switch in another VM which actually runs netconf code. I tried to make it work in testing netconf plugin by starting

Hi all, I will try to sync with Andy tomorrow and get this properly documented in case we do not have time to make a proper session. BR/Luis

General ODL discussion is taking longer, I do not think we can start this at 16:00 PM, I will inform you when we do it. BR/Luis

Hi all, Interested in this topic connect in at 16:00 PM PST: [ Proxy ] - Testing Activities and Automation Meeting Number: 202986568 Meeting Password: 123456 Go to

Hi all, Interested in this topic connect in 15 mins (14:00 PM PST): [ Proxy ] - Testing Activities and Automation Meeting Number: 202986568 Meeting Password: 123456 Go to

Thanks. A record of meeting is also good enough. However, if Andy need our lab installing or upgrading new software when integrating it with ODL, we can make a response in time. So, hope Andy is

Hi all, Following our last meeting discussion on how to download and use controller artifacts, I have created this wiki that can be useful for some of you:

Hi Guangpeng, we will try to set up remote access as well as record the session so that it can be seen later. Only issue with this activity is Andy avaliability, he could not really confirm me he will

Hi Luis, As you know, we have already built an open lab for Open Daylight Test at Huawei. And we want to join the discussion as you mentioned in the MoM:”Andy, Casper and Luis will start working

okay, there seems a confusion. ODL has an internal Netconf server. This server is used for configuration of internal ODL stuff. In order to test the Netconf SB plug-in you need an _external_ Netconf

Hi Reinaldo, I believe netconf server will be started automatically after starting the controller. Here is the following lines called from config.ini. (Please correct me if I am wrong) # Netconf

Hi all, minutes available at: https://wiki.opendaylight.org/view/CrossProject:Integration_Group:Meetings#Meeting_Minutes BR/Luis

Hi Madhusudan, I have been looking into Netconf plugin since last couple of days and what I did is to put controller.currentconfig.xml in following location: