|
git authorization issue 3 messages
Hello All, If this is not the appropriate forum for this question please tell me where I should seek help. This is an administrative issue. I have followed the instructions here: http://docs.opendayli
Hello All, If this is not the appropriate forum for this question please tell me where I should seek help. This is an administrative issue. I have followed the instructions here: http://docs.opendayli
|
By
Frank Sandoval
·
|
|
Integration test scripts 2 messages
Hi Could you point me to right place where I can test scripts to test open daylight implementation for the functionality of service chaining? Thanks Arun
Hi Could you point me to right place where I can test scripts to test open daylight implementation for the functionality of service chaining? Thanks Arun
|
By
adendukuri@cloud-evolutions.com
·
|
|
[Jenkins] Test Jobs Error 2 messages
Hi all, I followed the tutorial in this link, but it failed when I want to test a job. I am not sure where is the problem. Could I test a job that already existed remotely? Any comments are welcomed!
Hi all, I followed the tutorial in this link, but it failed when I want to test a job. I am not sure where is the problem. Could I test a job that already existed remotely? Any comments are welcomed!
|
By
Xiao Shawn Lin
·
|
|
Robot Framework 10 messages
Hi We are from the Controller Shield project. We have created a few robot scripts which could be verified locally. However we are not able to test our code from gerrit. We are not even able to install
Hi We are from the Controller Shield project. We have created a few robot scripts which could be verified locally. However we are not able to test our code from gerrit. We are not even able to install
|
By
Thomas Lee S
·
|
|
public key failed 2 messages
Hi , I install VM as shown below , and I am trying to run test from /integration-test/csit/suites/l2switch/Loop_Removal_OF13 from the VM by this command : pybot -v CONTROLLER:127.0.0.1 -v MININET:127.
Hi , I install VM as shown below , and I am trying to run test from /integration-test/csit/suites/l2switch/Loop_Removal_OF13 from the VM by this command : pybot -v CONTROLLER:127.0.0.1 -v MININET:127.
|
By
1234
·
|
|
[integration-dev] integration project taking long time to generate the tar 3 messages
also, is it consistently taking that long, or just the first time when it's needing to pull in new artifacts. I cleaned my local m2 repo and built stable/lithium and it took 24 minutes. a second build
also, is it consistently taking that long, or just the first time when it's needing to pull in new artifacts. I cleaned my local m2 repo and built stable/lithium and it took 24 minutes. a second build
|
By
Jamo Luhrsen
·
|
|
integration project taking long time to generate the tar
Hi team We took integration project of opendaylight and tweaked it to add our features this was perfectly working with lithium and the tar generated in 6 minutes but with beryllium , it took 24 minute
Hi team We took integration project of opendaylight and tweaked it to add our features this was perfectly working with lithium and the tar generated in 6 minutes but with beryllium , it took 24 minute
|
By
Vikram
·
|
|
Using variables inside karaf configuration files 2 messages
Hi We have a requirement to pass the value of variable to cfg files at build time, no idea what is the easiest way to achieve this In integration project, karaf distribution has the file src/main/asse
Hi We have a requirement to pass the value of variable to cfg files at build time, no idea what is the easiest way to achieve this In integration project, karaf distribution has the file src/main/asse
|
By
Vikram
·
|
|
[releng] Ubuntu-14-04-basic password required 2 messages
Hi Tomas, With current controller and mininet images we run these lines at start up (jenkins-scripts): # make sure we don't require tty for sudo operations cat <<EOF >/etc/sudoers.d/89-jenkins-user-de
Hi Tomas, With current controller and mininet images we run these lines at start up (jenkins-scripts): # make sure we don't require tty for sudo operations cat <<EOF >/etc/sudoers.d/89-jenkins-user-de
|
By
Luis Gomez
·
|
|
[releng] [integration-dev] Ubuntu-14-04-basic password required
Tomas, I've added the [releng] group to this email. What I think you want to do is something like this, which we are allowing passwordless sudo for the jenkins user: https://github.com/opendaylight/re
Tomas, I've added the [releng] group to this email. What I think you want to do is something like this, which we are allowing passwordless sudo for the jenkins user: https://github.com/opendaylight/re
|
By
Jamo Luhrsen
·
|
|
Ubuntu-14-04-basic password required
Dear Integration Devs, We have been recently provided with ubuntu-14-04-basic image under Ubuntu cloud in Jenkins Sandbox which we need for writing CSIT jobs for groupbasedpolicy project. There is one
Dear Integration Devs, We have been recently provided with ubuntu-14-04-basic image under Ubuntu cloud in Jenkins Sandbox which we need for writing CSIT jobs for groupbasedpolicy project. There is one
|
By
Tomas Cechvala -X (tcechval - PANTHEON TECHNOLOGIES@Cisco)
·
|
|
ODL Controller System Test Setup 2 messages
Hi, I just started to run the System Test for the ODL Controller and I have some questions. Is there a mapping of the different features required to be installed for every test suite? aaa bgpcep capwa
Hi, I just started to run the System Test for the ODL Controller and I have some questions. Is there a mapping of the different features required to be installed for every test suite? aaa bgpcep capwa
|
By
Manuel Nieves
·
|
|
ODL & OpenStack Integration
Hello all, I am trying to integrate ODL with OpenStack by following this link. I have followed every step mentioned in the above link. Both the OpenStack and OpenDay Light are running separately. But
Hello all, I am trying to integrate ODL with OpenStack by following this link. I have followed every step mentioned in the above link. Both the OpenStack and OpenDay Light are running separately. But
|
By
Junaid
·
|
|
[openflowplugin-users] [OpenDaylight Discuss] controller doesn't c the connection between switches
Hi Dug, the osgi-console way requires org.opendaylight.openflowplugin.test-provider-*.jar bundle where the command is registered. Both ways - restconf and osgi console command - do write flow into con
Hi Dug, the osgi-console way requires org.opendaylight.openflowplugin.test-provider-*.jar bundle where the command is registered. Both ways - restconf and osgi console command - do write flow into con
|
By
Michal Rehak -X (mirehak - Pantheon Technologies SRO@Cisco)
·
|
|
[controller-users] controller doesn't c the connection between switches
What distribution of OpenDaylight are you using? Looking at this: https://wiki.opendaylight.org/view/OpenDaylight_OpenFlow_Plugin:End_to_End_Flows It seems like you might want to try building from the
What distribution of OpenDaylight are you using? Looking at this: https://wiki.opendaylight.org/view/OpenDaylight_OpenFlow_Plugin:End_to_End_Flows It seems like you might want to try building from the
|
By
Colin Dixon
·
|
|
[OpenDaylight Discuss] controller doesn't c the connection between switches 2 messages
Hi Dug, You will need to download postman/RESTAPI app in browser for sending this file. 1. action: POST 2. url: http://localhost:8080/restconf/config/opendaylight-inventory:nodes/node/openflow:i/table
Hi Dug, You will need to download postman/RESTAPI app in browser for sending this file. 1. action: POST 2. url: http://localhost:8080/restconf/config/opendaylight-inventory:nodes/node/openflow:i/table
|
By
Madhusudhan Kandadai
·
|
|
OSGI addMDFlow command not recognized
Hi, i will appreciate any assistance i have a problem that the controller cant discover topology i got some assistance with what to do i use ODL controller X 1 OFSoftSwitch13 X 2 controller dont see c
Hi, i will appreciate any assistance i have a problem that the controller cant discover topology i got some assistance with what to do i use ODL controller X 1 OFSoftSwitch13 X 2 controller dont see c
|
By
dug moon
·
|
|
controller doesn't c the connection between switches
Hi, thanks for any assistance in advance i am trying to setup a small network on real computers which includes controller - opendaylight switches - OFSOFTSWITCH13 X2 nodes - each switch has 1 node att
Hi, thanks for any assistance in advance i am trying to setup a small network on real computers which includes controller - opendaylight switches - OFSOFTSWITCH13 X2 nodes - each switch has 1 node att
|
By
dug moon
·
|