Hi All, I need to establish a bgp session with route reflector running with odl and my router and so far, i have done the following. 1) Installed odl(karaf-0.7.1) - nitrogen version. 2) solved j depen

Hi All, I need to establish a bgp session with route reflector running with odl and my router and so far, i have done the following. 1) Installed odl(karaf-0.7.1) - nitrogen version. 2) solved j depen

Hi All, I need to establish a bgp session with route reflector running with odl and my router and so far, i have done the following. 1) Installed odl(karaf-0.7.1) - nitrogen version. 2) solved j depen

Hi All, I need to establish a bgp session with route reflector running with odl and my router and so far, i have done the following. 1) Installed odl(karaf-0.7.1) - nitrogen version. 2) solved j depen

I need to establish a bgp session with route reflector running with odl and my router and so far, i have done the following. 1) Installed odl(karaf-0.7.1) - nitrogen version. 2) solved j dependencies

Hi: State OpenDaylight version: Carbon SR2 I use BGP-IPv4 Flow Specification programming to post routing.The ODL is OK when I post less than 2000 routing to it.Without the limit of transferring speed,

Hello: State OpenDaylight version ： Carbon SR2 and Nitrogen SR1 I use BGP IPv4 Flow Specification Programming post route. The ODL unresponsive as long as i post route more than 4000.I use jstack to ch

Hi, Specifically to PCEP SR, we are finally done with all the changes to draft-ietf-pce-lsp-setup-type (passed wg last cal) and draft-ietf-pce-segment-routing (ready for wglc), there have been some ch

Hi folks, Does anyone have a working ODL PCEP with Junos -that is to be able to see provisioned LSPs and be able to provision new ones. I'm using Boron-SR4 and 15.1F6-S5.6 When I used directly attache

Hi,all: Hi. I'm trying to use ODL to controller routes on a server: 1. add an BGP instance on ODL controller 2. setup an IPv4 BGP session between the ODL controller and a server with quagga 3. add an

Hi, I am trying to setup Segment routing - TE, from ODL, to Junos, using PCEP. For this, I need to change the SR Subonject type (to 36, which is what Junos supports). Followed the PCEP user guide, whi

Hi Folks, Currently when BGP feature is installed, sample initial config for BGP RIB, peer and network-topologies is installed under ${KARAF_HOME}/etc/opendaylight/bgp directory (files protocols-confi

Hi Could you please let us know if ODL carbon support draft-anathakrishnan-pce-stateful-path-protection ? When it is planned to support ? Regards, Abhinav

Hi Satish, Could you provide a packet capture along with karaf.log when the router BGP session is established? I tested it locally the controller is properly show me 65535:65535. Best Regards, Kevin W

Hi, I have a configured a ASN 4294967295 in one of the router and have also configured the controller IP as it's peer. The controller has been configured as the route reflector. But the controller, af

Hi, In the ODL BGP user guide it has been mentioned that “OpenDaylight BGP implementation supports four-octet AS numbers only”. Does this mean the 2 byte AS numbers will not be supported by ODL ? Rega

I use distribution-karaf-0.6.0-Carbon.zip binary packege downloaded from ODL website the attatchment is the karaf.log follow are my configurations: http://<hostname>:8181/restconf/config/openconfig-ne

HI: I run into a problem today when doing following operations: 1、./bin/karaf to start ODL, install odl-bgpcep-bgp feature, then configure bgp rib and peer etc. and can correctly get loc_rib and netwo

Hi all, I do not have access to XRv 6.0. Hence, I am continuing with CLI configuration on 5.3.0. I want to obtain BGP statistics from the switch. In order to do so, I believe we need to use bmp. I fol

Hi all, I am trying to configure a BGP session between ODL (Boron-SR3) and Cisco IOS-XR (5.3.0). In order to do so, I am following the steps specified in http://docs.opendaylight.org/en/stable-boron/u