|
[release] Autorelease aluminium-mvn35-openjdk11 failed to build hwvtepsouthbound-impl from ovsdb
Attention ovsdb-devs,
Autorelease aluminium-mvn35-openjdk11 failed to build hwvtepsouthbound-impl from ovsdb in build
45. Attached is a snippet of the error message related to the
failure that we
Attention ovsdb-devs,
Autorelease aluminium-mvn35-openjdk11 failed to build hwvtepsouthbound-impl from ovsdb in build
45. Attached is a snippet of the error message related to the
failure that we
|
By
Jenkins <jenkins-dontreply@...>
·
#4855
·
|
|
Re: [OpenDaylight TSC] MRI bump for Neon SR3
Ok let me add the email lists from all the managed projects as a reminder that Neon SR3 and its corresponding patches require your attention
Thanks
--
Daniel de la Rosa
Customer Support Manager ( ODL
Ok let me add the email lists from all the managed projects as a reminder that Neon SR3 and its corresponding patches require your attention
Thanks
--
Daniel de la Rosa
Customer Support Manager ( ODL
|
By
Daniel De La Rosa <ddelarosa@...>
·
#4854
·
|
|
Re: OVSDB: delete reconciliation support on termination points
++ ovsdb-dev
By
Chetan
·
#4853
·
|
|
Re: VXLAN Tunnels
I added out of band interfaces and disabled inband. That seemed to resolve that issue. Can you bind the vxlan/gre tunnels to a specific source interface?
My out of band management interface has a
I added out of band interfaces and disabled inband. That seemed to resolve that issue. Can you bind the vxlan/gre tunnels to a specific source interface?
My out of band management interface has a
|
By
Dennis Heim
·
#4852
·
|
|
Re: VXLAN Tunnels
Could you please give the output the below commands, when the traffic stops working?
Ovs-vsctl show
Ovs-ofctl <bridge> dump-flows
Ovs-vsctl list interface <tunnel-name>
Thanks,
Faseela
Could you please give the output the below commands, when the traffic stops working?
Ovs-vsctl show
Ovs-ofctl <bridge> dump-flows
Ovs-vsctl list interface <tunnel-name>
Thanks,
Faseela
|
By
Faseela K
·
#4851
·
|
|
Re: VXLAN Tunnels
So tunnel wise, we have: A->B & A->C. If the tunnel A->B is the only tunnel that is established, I can pass traffic. When I bring up A->C connectivity pretty much dies (dropped packets). If I bring up
So tunnel wise, we have: A->B & A->C. If the tunnel A->B is the only tunnel that is established, I can pass traffic. When I bring up A->C connectivity pretty much dies (dropped packets). If I bring up
|
By
Dennis Heim
·
#4850
·
|
|
Re: VXLAN Tunnels
Hi,
Could you please clarify what you mean by “Either tunnel works, fine, but if both are up at the same time, traffic does not pass”.
Thanks,
Faseela
Hi,
Could you please clarify what you mean by “Either tunnel works, fine, but if both are up at the same time, traffic does not pass”.
Thanks,
Faseela
|
By
Faseela K
·
#4849
·
|
|
VXLAN Tunnels
I have a set with 3 switches (A, B, and C). A has a vxlan tunnel to both B and C. I am also using the L2-switch plugin. Either tunnel works, fine, but if both are up at the same time, traffic does not
I have a set with 3 switches (A, B, and C). A has a vxlan tunnel to both B and C. I am also using the L2-switch plugin. Either tunnel works, fine, but if both are up at the same time, traffic does not
|
By
Dennis Heim
·
#4848
·
|
|
Re: VXLAN Controller
Hi,
I think the l2switch application in opendaylight will help you for this.
https://docs.opendaylight.org/en/stable-fluorine/user-guide/l2switch-user-guide.html
Thanks,
Faseela
Hi,
I think the l2switch application in opendaylight will help you for this.
https://docs.opendaylight.org/en/stable-fluorine/user-guide/l2switch-user-guide.html
Thanks,
Faseela
|
By
Faseela K
·
#4847
·
|
|
VXLAN Controller
I am new to open day light. I have a 4 open vSwitches setup. I also have openDaylight installed. I have the Open virtual Switches connected with set-manager and set-controller commands to my open day
I am new to open day light. I have a 4 open vSwitches setup. I also have openDaylight installed. I have the Open virtual Switches connected with set-manager and set-controller commands to my open day
|
By
Dennis Heim
·
#4846
·
|
|
Re: [release] Neon SR1 Status build 2019-05-04
Hello:
We need the following projects to sign-off the CSIT tests noted in the spreadsheet ASAP.
* bgpcep
* lispflowmapping
* netconf
* ovsdb
* netvirt
* yangtools
Thanks,
Anil
Hello:
We need the following projects to sign-off the CSIT tests noted in the spreadsheet ASAP.
* bgpcep
* lispflowmapping
* netconf
* ovsdb
* netvirt
* yangtools
Thanks,
Anil
|
By
Anil Belur <abelur@...>
·
#4845
·
|
|
Jira Cleanup and Call for contribution for unassigned issues
Hi Ovsdb-devs,
I cleaned up the Jira dashboard of the project and moved all the bugs, improvements and features that is available to the contribution. You can find the list here
Hi Ovsdb-devs,
I cleaned up the Jira dashboard of the project and moved all the bugs, improvements and features that is available to the contribution. You can find the list here
|
By
Anil Vishnoi
·
#4844
·
|
|
Help needed on Transact Builder to update OVSDB table on Device from controller
Dear all,
I’m a new bee into OVS and have started experimented from few days. Would like to know if there are any good starting points or readme or documentation which explains about using ovsdb
Dear all,
I’m a new bee into OVS and have started experimented from few days. Would like to know if there are any good starting points or readme or documentation which explains about using ovsdb
|
By
Kiranaab Ki
·
#4843
·
|
|
Re: [OpenDaylight TSC] Fwd: Vote on Anil for OVSDB PTL
Thanks.
By
Abhijit Kumbhare
·
#4842
·
|
|
Re: [OpenDaylight TSC] Fwd: Vote on Anil for OVSDB PTL
It's already updated.
--
Thanks
Anil
It's already updated.
--
Thanks
Anil
|
By
Anil Vishnoi
·
#4841
·
|
|
Re: [OpenDaylight TSC] Fwd: Vote on Anil for OVSDB PTL
Thanks for letting us know Vishal. Can you folks please update the OVSDB wiki with the new PTL info?
Thanks for letting us know Vishal. Can you folks please update the OVSDB wiki with the new PTL info?
|
By
Abhijit Kumbhare
·
#4840
·
|
|
Vote on Anil for OVSDB PTL
OVSDB Project has voted for Anil Vishnoi to be the PTL. Vote carried with 3 out of 4 with one no response.
Congratulations Anil.
---------- Forwarded message ---------
From: Vishal Thapar
OVSDB Project has voted for Anil Vishnoi to be the PTL. Vote carried with 3 out of 4 with one no response.
Congratulations Anil.
---------- Forwarded message ---------
From: Vishal Thapar
|
By
Vishal Thapar <vthapar@...>
·
#4839
·
|
|
Re: Vote on Anil for OVSDB PTL
Thanks Vishal, can you please also notify TSC about it.
--
Thanks
Anil
Thanks Vishal, can you please also notify TSC about it.
--
Thanks
Anil
|
By
Anil Vishnoi
·
#4838
·
|
|
Re: Vote on Anil for OVSDB PTL
With 3 out of 4 +1s and one no response the vote carries.
Congratulations Anil. Best wishes for your second stint as OVSDB PTL.
With 3 out of 4 +1s and one no response the vote carries.
Congratulations Anil. Best wishes for your second stint as OVSDB PTL.
|
By
Vishal Thapar <vthapar@...>
·
#4837
·
|
|
[release] Autorelease sodium-mvn35-openjdk11 failed to build southbound-impl from ovsdb
Attention ovsdb-devs,
Autorelease sodium-mvn35-openjdk11 failed to build southbound-impl from ovsdb in build
36. Attached is a snippet of the error message related to the
failure that we were able to
Attention ovsdb-devs,
Autorelease sodium-mvn35-openjdk11 failed to build southbound-impl from ovsdb in build
36. Attached is a snippet of the error message related to the
failure that we were able to
|
By
Jenkins <jenkins-dontreply@...>
·
#4836
·
|